The NoNpDrm plugin allows you to install official PS Vita files forth with any updates or patches. For this guide, we will install NoNpDrm files on our hacked PS Vita. You lot must have NoNpDrm installed (steps ane-3) earlier yous can employ NoPayStation or PKGj.

Files and Programs Needed

NoNpDrm.skprx: GitHub Link
VitaShell: GitHub Link
WinSCP: WinSCP Homepage
NoNPDrm File: Google or NoPayStation PSVitaMod Page
Make sure you lot Enable Unsafe Homebrew in HENkaku Settings.
Once yous have NoNpDrm installed (Afterwards step 3), y'all tin get to my other guides to install PKGj or NoPayStation.

Need More Storage?

Upgrade your Micro SD Menu to store more files. I got my Micro SD Card here.

Step i: Ready upwardly Connection to WinSCP.

NoNpDrmPT1

  • Turn on the Wi-Fi on the Vita and go to VitaShell.
  • Printing Offset to bring up Main settings and change "SELECT push" to FTP, and press O to exit.
  • If yous don't have sd2vita installed, the USB device should be Memory Card instead.

Pace ane.5: Gear up Connection to WinSCP.

FTP Server

  • Press SELECT to bring up your FTP server information.
  • These numbers let WinSCP to connect to your Vita. Exit this notification on or press Ten.

Note:
If you lot need aid installing WinSCP, and then run across my guide here (https://psvitamod.com/set-upward-ftp-connection/).

Step 2: Transfer NoNpDrm.skprx to Tai Folder

  • Open WinSCP and on the login that pops up, change File Protocol to FTP.
  • Enter the host proper name (appears after ftp://) and port # (concluding iv digits after the colon)
  • Click Login subsequently saving the session. Move the nonpdrm.skprx into the ur0:tai folder
  • Await till you get a notification that the file was transferred.

Note:
This guide refers to the Tai binder in the ur0 directory, this is considering I moved my tai folder to ur0. If your tai folder is in ux0, considered moving it to ur0:tai, change the config.txt to refer to ur0, and delete the tai folder in ux0. Otherwise, replace all instances of ur0:tai with ux0:tai.

Step 3: Edit Config.txt file in ur0:Tai

  • Become to the config.txt file in the tai folder and open up information technology by pressing X.
  • Whorl down to *Kernal and press Triangle to bring up a menu.
  • Press "Insert empty line" and type in ur0:tai/nonpdrm.skprx
    • Make sure the ur0 is a nix and not the letter "O"
  • Printing O to go back out to your config file so O again to get out.
  • Press X to save your modifications.

Note:
If you want to install downloads through PKGj instead, restart your Vita after pressing X to save the modifications and then follow my PKGj guide.

Footstep 4: Switch to USB connectedness

NoNpDrmPT4

  • Press Outset to bring up main settings and change SELECT button to USB.
  • Press SELECT to connect to your PC through USB.
  • Expect for a screen to pop on your PC containing all the files on your memory menu.

Step v: Enable Hidden Folders.

Show Hidden Folders

  • You need to enable View Subconscious folders to come across everything in your memory menu.
  • Go to View / Options /Change folder and search options / View / and select "Show subconscious files, folders, and drives"
  • Make certain to unchecked "Hide protected operating system files (Recommended)".
  • Click Ok.

Step six: Transfer Files to Memory Card.

Install NoNpDRm PT1.flv_000131100

  • Your downloaded files will either contain an App folder or a binder that starts with a letter follow past numbers.
  • In this instance our file has an app folder and within is PCSE00277.
  • You should come across an app folder on your memory card folder.
  • Copy the PCSE00277 folder and paste it into the App folder.
  • Await for the files to finish transferring.

Step half-dozen.5: Transfer DLC, Patches, or Licences.

  • If your file contains other folders such as addcont (DLC), license, patch, app and then you will need to transfer those over to the same respective folders on your memory card.
  • If the folders are not on your memory carte du jour, then create them.

Moving DLC

  • In the diagram higher up, each folder volition contain the ID (PCSA00147), except for license.
  • Y'all need to motion each binder in the cerise foursquare to the same folder in your memory card.
  • Ex: Move the PCSA00147 folder in the app folder to the app folder in your retentiveness carte du jour.

Step 7: Reset PS Vita.

NoNpDrmPt7

  • Back on the Vita press O to abolish the USB connection
  • Press SELECT to bring up the main settings.
  • Printing Reboot on Vitashell, wait for the Vita to reset, and so launch Vitashell again.

Note:
1. Every time you add together or change anything in your config.txt file you need to restart the Vita for those changes to occur.
two. If you are using the official PlayStation Vita memory yous need to change your USB device to memory menu. See film beneath. (Thanks to Jazzman for pointing this out)

Memory Card

Step 8: Have VitaShell Install the File.

REfresh LiveArea

  • Press triangle and click on Refresh LiveArea
  • Printing Ten to continue.
  • The screen should say "Refreshed 1 items."

Note: If you are transferring multiple files, you just demand to refresh one time. In that example the screen should say "Refreshed X items" where Ten is the number of files you transferred.

REfreshed 1 item

Pace eight: Become Back out to the Home Screen.

  • Go back to the abode screen and scroll all the manner down. There should now be a billowy bubble.

Notes: If you are getting 0 items refreshed

  1. It might exist the file y'all have. Try to search for some other source such as NoPayStation (https://psvitamod.com/nopaystation) or PKGj (https://psvitamod.com/pkgj).
  2. Games, DLCS, and updates become in ux0, but Nonpdrm.skprx should be in ur0:tai. Make certain there is no tai folder in ux0.
  3. If your folder has patches, DLC, etc., install just the App and see if that works.
  4. Please brand sure you have nonpdrm.skprx nether the *Kernal in config.txt and that you lot restarted your Vita later doing this.
  5. Make sure you are putting the files in the right places. Ex: Put any is inside the App folder of the downloaded file to the inside of the App folder in ux:0.
  6. Reload your taihen file in Henkaku settings.